It is a part of the mop of the cleaning appliance because it is fixed to the head of the mop, so it is called the mop head. It is made of cotton, cotton or other fiber materials and is combined with a mop rod to form a mop. It is mainly used for the cleaning of concrete floors, floors and marble floors.
According to the material and performance can be divided into cotton mop head, fiber mop head, cotton mop head.
1. Mop cotton mop head: The rubber wool has strong water absorption. It can be used without squeezing the ground before the mopping. It can form static electricity through air convection and friction. It can vacuum, absorb sand and suck hair without hurting the ground. When used, the hands are not damp and dirt, simple and clean. In particular, replacing the cotton mop head is economical and affordable. The disadvantage is that it is difficult to wipe a narrow gap due to the shape (bar shape).
2. Fiber mop head: The price of the microfiber material mop is relatively expensive. Because of the special process, the flat type tractor can vertically touch the ground and change the shortcoming of the cotton thread in parallel with the ground. Since it can be “intimately contacted” with the ground, friction generates static electricity, so that the dirt in the gap can be removed more thoroughly, and the ground can be cleaned with almost no wear and can be used for polishing and waxing. However, the mop should be cleaned by hand or by a washing machine.
3. Cotton mop head: Cotton material prefers to dry, more precisely, it can be used on wooden floors to show its advantages. Once the cotton tractor is wet, the hair attached to it will be difficult to clean. When it is wiped out, and then wiped somewhere else, it will be printed, and the black print will not be clean. The small things stick to the mop, dragged to the ground, and then sweep. Therefore, the cotton mop should be as dry as possible. And before mopping the floor, it is advisable to clean the hair on the floor or vacuum it.
According to the performance, it can be divided into a flat mop head, a water mop head, and a mop head.
Washing and maintenance
Any material mop should be cleaned with a neutral detergent. As the cleaning tool itself should be cleaned, it is best to put some disinfectant disinfection. But not all mops can bask in the sun. Generally, the mop of the microfiber, non-woven fabric, and the rubber-cotton material should be dried, and the sun may be exposed, and the material may shrink and deform, and the adsorption effect is also weakened. The cotton mop is about to get the sun because the mop will lose hair and smell when it is wet for a long time.
It is best not to stack the mops on the ground. The flat mop is best to have the tractor facing up, and the thin mop will be hung up.
When needed, configure two mops, one flat dry drag, one thin wet drag, and the tractor can rotate 360 ??degrees to clear the dead angle.
Broom supplier offers custom and private label service for all brooms designs on our website.