Prototype mop
The first mop with a long handle.
Simple and inexpensive.
The working head has changed from a rag block to a cloth strip.
The main changes are:
(1) The shape of the working head starts from a round shape and develops into a bar shape, a flat shape, and so on.
(2) In addition to the cloth strips, the material shape of the working head also appears in the shape of yarn rope.
(3) In addition to cotton, the material of the working head also includes ultra-fine fibers and rubber slivers.
(4) In addition to the fixed type, the working head can be installed in a replaceable type.
(5) In addition to the fixed type, the working rod also has a split type and a telescopic type that can be adjusted in length.
New type wooden mop
The new wooden mop adopts a replaceable mop design. First, use a wet mop to mop the floor, and then change to a dry mop. Moreover, if the mop is broken, it can be replaced, which saves costs. Traditional mops are still the most used, so many manufacturers still focus on traditional mops. This new type of mop was developed by Hefei Aiwujia Commodity Co., Ltd. After it was put on the market, it worked well.
Twist mop
(1) Stainless steel material, will not rust after long-term use
(2) Use microfiber cloth and stainless steel mop for wiping car glass and glasses
(3) Super decontamination ability, electrostatic adsorption ability, water absorption ability
(4) The top of the cleaning head is equipped with a protective part to avoid damage to the cleaned surface from the tip of the working rod.
(5) A fixing device is installed at the lower end of the rotating drum to avoid the movement of the rotating drum when working.
(6) A center positioning device is installed at the upper end of the rotary drum to avoid swinging during work.
(7) A non-return lock is installed on the working rod to avoid reversal when the rotating drum is working and squeezing water.
(8) Telescopic pole design, adjust the length according to the height
(9) Rotating and squeezing water is effortless and no auxiliary tools are needed
(10) The cloth head can be easily replaced
Rubber cotton mop
Water mop
Its biggest feature is that while ensuring the self-cleaning function of the squeezing water mop is inherited, the material of the working head is changed using polyvinyl alcohol rubber cotton.
The collodion has strong water absorption, which can fully guarantee the cleaning work needs of the working head.
The main changes are around the water squeezing function, the main types are:
(1) Roller squeezes water
(2) Squeeze water on the board
Mop accessories
Auxiliary appliances used by mops.
Mop accessories can be roughly divided into two categories:
(1) Supplement the deficiencies of the mop function;
(2) Management tools.
(1) Functional appliances: fried water bucket (car). Such as: various auxiliary prototype mop mop head dehydration squeeze water, spin the bucket.
(2) Management tools: collection carts, racks, hangers, etc. of various cleaning tools such as mops.
Spin mop
Using the principle of centrifugal force, with a little manpower, the mop has the same effect as being dried in a washing machine.
This kind of tractor can be used for up to 3 months, the one-way bearing and the base spring are easy to break, and no replacement is found. Belongs to disposable items. An improved spin-drying mop appeared on the market. It is called “Miaoshen Mop”. It is produced by Hefei Aimy Home’s daily necessities. The biggest difference between this kind of magic mop and the good ones on the market is that it is aimed at One-way bearings, pedals, gears, etc. are easily broken. The use of high-quality elastic nylon gears with high hardness and toughness solves the trouble of breaking after three months of use. Under standardized operation, it will not be broken even if it is used for more than half a year. However, the key is that we must master the strength in the process of normal use, and follow the steps in the manual to standardize the operation, so as to extend its service life.